Faith Lutheran Church – Knoxville, TN

A complete retro-fit of the existing HVAC systems was needed for this church. We worked together with Faith Lutheran’s advisory board to come up with a comprehensive plan to meet their needs. Ultimately (2) 40 ton commercial air handlers were replaced along with a majority condensers. The control system was also upgraded to a Distech system complete with a new front end and graphical display.  An additional 10 ton gas split system was also replaced. The gas pipe system was also upgraded to a 2 psi system to support the new duct furnace added to air handler one. 


Johnny Brusco’s Pizza – Knoxville, TN

An existing retail strip mall off Choto Road is the new home to Johnny Brusco’s Pizza. The existing space was of adequate size but presented a few clearance challenges. Our team worked with Monolith Construction to overcome these hurdles. The restaurant has a full kitchen, pizza oven, grease hood as well as a couple split systems to keep everyone cool and comfortable. Plus it has some great looking red double wall spiral duct!


ALPS Adult Day Services – Greeneville, TN

ALPS completely remodeled a building in the heart of Greeneville to serve as its second location. The HVAC for this facility is completely new. It features 2 gas package units as well as 4 gas furnace split systems. We also installed a small kitchen hood and make-up air unit. Our team did a fantastic job squeezing the equipment, duct and controls into this existing structure.

Tennessee College of Applied Technology (TCAT) – Athens, TN

TCAT Athens had a new boiler and chiller but their air handlers, fan coils and VAVs were dated. A local engineering firm constructed the plans to replace the equipment in the worst shape. 5 air handlers, 10 fan coils and 16 VAVs were replaced as well as one hot water and one chilled water pump. The controls were also upgraded. The project went great. We are now maintaining all of their equipment on site.

Yamaha Jet Boat Manufacturing – Vonore, TN

This project was design build project in conjunction with Yamaha’s staff. This new building will house a new boat hull and deck construction line. Airflow, direction, and control were major factors in this industrial ventilation build. In total we installed (4) large make up air units along with (6) exhaust fans. Each of these pieces of equipment were equipped with custom duct and air distribution to meet the needs of this specific application.

Tennessee College of Applied Technology – Morristown, TN

We performed a boiler, pump, and variable frequency drive (VFD) replacement for TCAT in Morristown in conjunction with the Sate of Tennessee. The boiler selected was a 3 million BTU Lochinvar Crest condensing boiler. The boiler was paired with a Bell & Gossett pump and Danfoss VFD. This system has regulated the heating of the building as well as saving the school money on their utility bill.

Regal Cinemas Cinebarre – Knoxville, TN

Renovation and upgrade of an existing movie theater into a state of the art Cinebarre. A total of 9 roof top units were replaced that serve the auditoriums. A new kitchen was added with 5 hoods, exhaust fans, make up air unit and new ice machines. Several hundred feet of grease duct were fabricated and installed as well. Many repairs were also made to keep existing equipment up and running. The project was successful for all involved.

Fire Station #4 – Morristown, TN

Ground up construction of a new fire station in Morrisotwn, Tennessee. The fire station has a living quarters equipped with two split system heat pumps. On the other end of building is a large garage which includes several roof mounted exhaust fans and a set of louvers at ground level to keep fresh air moving. Two unit heaters in the garage serve as the heat source for winter time operation. Exterior storage rooms also had an exhaust fans and electric heaters installed to keep them comfortable.

BB&T Bank at downtown Sevierville, TN

This project included the demo and removal of (38) water source heat pump systems, 100 ton capacity cooling tower, water boiler, and controls. (38) new water source heat pumps installed throughout this 5 floor building, new 100 ton capacity cooling tower set and installed on the roof, new 1.2 million btu boiler installed inside the penthouse located on the roof, variable frequency drives installed on all pumps for the building, and new controls to efficiently regulate power consumption while maintaining comfortable temperatures throughout the entire building.

Bank Remodel – CBBC Bank – Alcoa, TN

This project called for a complete remodel and expansion of the bank. The existing systems including duct were demoed and removed. Three new split systems were then added complete with new duct work for each unit. The entire remodel project was completed in about two months.

Dust Collector – Denso Manufacturing – Maryville, TN

Complete installation of a dust collector and all piping for Denso, a manufacture located in Maryville, Tennessee. All of the duct was custom made in our fabrication shop and assembled on site. The duct was fabricated from 16ga metal and welded along the seems. Along with the duct work an airline was routed to the collector. The project also required a very larger exhaust stack and complete insulation of all the duct work. The installation was performed safely and with great quality.

Fire Station #12 – Knoxville, TN

This fire station was saved from demolition and completely remodeled. A new commercial hood complete with grease duct and an exhaust fan were installed. The generator for the station was replaced and upgraded. This called for a new main gas line to be ran to the generator. Along the renovation there were also several smaller replacements and repairs to the HVAC system. This fire station is now complete and ready to serve the community.

Display Garage – Morristown, TN

The project consisted of conditioning 5,700 square feet of entertainment and office space as well as heating 10,000 square feet of garage space. The job required custom duct work throughout the building in order to make the appearance visually appealing. We also ran gas lines throughout the garage to fire places, a grill, heaters, furnaces and water heaters.

Rusty Wallace Chevrolet – Remodel

Installation of five new roof top package units to serve remodeled spaces. This included two showrooms, parts center, break room, lounge and several offices. Two of the units required completely new duct systems while the other systems duct work was retrofitted to accommodate the new layout.

Farragut Town Hall – Unit Replacement

Replaced 5 sets of twined furnaces along with 5 condensers and evaporator coils. There was also a need to replace one additional condenser. All of this work was accomplished in a professional manner while making downtimes as short as possible for our customer. The job was completed on time and to our customers expectations.

TAC Air – Knoxville

A 2,000 sq. ft. addition to the lobby as well as a new line shack were added to TAC Air at Mcghee Tyson Airport. During the addition the lobby was also completely renovated. In total 2 new package units were added to serve the new space while 9 existing units were replaced.

Tennessee College of Applied Technology – Knoxville

This project was for the State of Tennessee and consisted of replacing an air cooled chiller, boiler, 4 pumps and installing two variable frequency drives. The project went smoothly and on time. We received a perfect score on our performance review. All parties have been very satisfied with the results of the project.